LinkReady.Independent product studioLINKREADY / BLOG & GUIDES
Work through engineering examples, parameter checks and reviewable deliverables.
LATEST ARTICLE
Engineering & manufacturing · SheetMetal Master
Solve the same right-angle bend with tangent lengths and outside dimensions, and avoid applying the unfolding compensation twice.
10 articles in this collection
Engineering & manufacturing · SheetMetal Master
Use a non-90-degree worked example to distinguish included angle from angle turned, then check inside radius, dimensions, and units.
Engineering & manufacturing · Tolerance Master
Use hole minus shaft consistently, calculate the two extreme differences, and distinguish one measured assembly from the full tolerance range.
Engineering & manufacturing · Gear Master
Connect constraints, candidate comparison, geometry screening, and export checks without confusing a nominal profile with production approval.
Engineering & manufacturing · HeatTreat Studio
Check measurement mapping, compare baseline and calibrated errors, and document holdout behavior before interpreting process scenarios.
Engineering & manufacturing · SheetMetal Master
Record a trial bend, recover allowance from outside dimensions, calculate K, and check it against a second specimen before using it for fabrication.
Engineering & manufacturing · Thread Torque Master
Separate dimensional lookup from assembly requirements and produce an estimate another engineer can review.
Engineering & manufacturing · Tolerance Master
Write explicit size limits, check measurement conditions, and use an assumed reading near the upper limit to understand the role of uncertainty.
Engineering & manufacturing · Tolerance Master
Convert micrometres to millimetres, calculate size limits and tolerance width from assumed deviations, and check a hole or shaft lookup.
Engineering & manufacturing · SheetMetal Master
A worked 90-degree bend example with a local calculator for allowance, deduction, and flat length. Outside dimensions, units, and assumptions are explicit.